Explore everything you need to know about agricultural drone flight controllers and drone radar systems, including how they work and which features are most important. This will help you make smart, high-performance selections for your agricultural drone setup.

What is an Agriculture Drone Flight Controller?

The agriculture flight controller is the brain of any drone. It is like a brain that collects data from sensors like GPS, gyroscope, accelerometer, magnetometer, barometer, and radar, and uses it to control the flight of the aircraft.

The flight controller does more than just keep agricultural drones stable.

• Keeps the drone level while it’s flying

• Follows pre-set waypoints for missions that don’t need a person to be there

• Changes in altitude depend on the ground

• Sets the intervals between sprays and the pump’s output

• Responds to commands from afar

• Carries out emergency plans such as return-to-home

A best flight controller for agriculture drone ensures that farm activities are safe, stable, and highly efficient. This saves time and chemicals and also increases production.

Why Specialized Flight Controllers for Agriculture Drones?

Hobbyist or photography drones are built for lighter tasks and worry-free flying, while agricultural drones are built for tough field work that needs to be done quickly and efficiently. They carry large volumes of liquids, fly for long periods of time, and perform automated spraying and mapping activities over large areas of agricultural land.

To meet these complex requirements, an agricultural drone flight controller needs to do more than just stabilize the drone. It must have smart flight logic, excellent payload management, and the ability to make changes in real-time.

Here’s why a specialized flight controller is essential for agri-drones:

1. Multi-Pump Spraying Systems

Modern agricultural drones have multiple nozzles and pumps, allowing them to spray a wider area and work over larger areas. A general-purpose drone flight controller cannot handle these systems very well.

• A dedicated flight controller for agriculture lets

• Control of two or four spray pumps separately

• Smart spray modes include interval, continuous, and auto-stop at the edge.

Working with flow meters and sensors that measure liquid volume

2. Terrain Following with Radar Integration

There are hills, uneven land, and different heights of crops in agricultural fields. For uniform spraying, it is important to keep the drone at a constant distance from the crop canopy.

The flight controller for agricultural drones works with terrain-following radar, which:

• Always look at the earth below

• Change the height of the drone in real time

• Work even when there is no GPS signal, as when it’s cloudy or under trees.

This is very important when spraying rice fields, orchards, vineyards or hilly farms.

3. Variable Spraying Based on Speed or Crop Density

The spray pattern needs to be changed depending on the following:

How fast does the drone fly?

• Overlapping passes

• Number of crops

• Rotation angle and end point

An agricultural FC can change the spray flow in real time, increasing or decreasing it based on flight data. This feature reduces chemical waste and improves yield.

Some modern flying controllers can also recognize objects using AI, which lets them intelligently apply over specific crops or areas that are affected.

4. Real-Time Data Transfer to Ground Station

Agricultural drones need to communicate with ground control stations (GCS) or mobile apps to plan missions, monitor performance, and detect problems.

A specialized agriculture drone FC helps with:

• Live telemetry sending

• Uploading and downloading mission routes

• Reports on flights and sprays

• Tuning parameters from a distance

5. Heavy Payload & Large Frame Support

When fully loaded with fuel and batteries, spraying drones can weigh more than 25 kg. Standard flight controllers made for photography drones that weigh 1–2 kg just can’t handle the motor load, power distribution, or fail-safe needs of these bigger UAVs.

At Bharat Skytech, we offer a range of advanced drone electrical components designed to enhance the performance and functionality of agriculture drones.

From flight controllers to radars and communication systems, our drone electrical components ensure seamless operations, providing the precision and reliability needed for modern farming.Here’s a look at the key products we offer in the Drone Electricals category:

CAN Hub – 12

The CAN Hub – 12 is a crucial electrical component designed to manage multiple data inputs and outputs for drones. This hub facilitates communication between various drone systems, ensuring smooth data flow and operational efficiency. In agricultural drones, it plays a key role in coordinating systems like spraying mechanisms, sensors, and flight control systems, making drone operations more integrated and streamlined.

Flow Meter

Precision is key in agricultural applications, and the Flow Meter ensures accurate measurement of liquid dispensed during tasks like crop spraying. This component helps farmers maintain exact spray rates, reducing waste and ensuring optimal pesticide or fertilizer coverage. With its advanced sensor technology, the flow meter delivers real-time data, enabling better control over the spraying process.

Obstacle Avoidance Radar

For drones operating in unpredictable terrains or around obstacles such as trees and buildings, the Obstacle Avoidance Radar is essential. This radar system detects and helps the drone avoid obstacles in its flight path, ensuring safe operations in both flat fields and more complex environments. It enhances the drone’s autonomy, reducing the risk of collisions and improving overall flight safety during agricultural tasks.

Terrain Following Radar

In agriculture, drones often need to fly at varying altitudes to ensure optimal spray coverage or data collection. The Terrain Following Radar enables drones to automatically adjust their altitude based on the landscape, maintaining a consistent height above the ground. This is particularly useful for precision agriculture, ensuring that drones deliver uniform spraying or data collection regardless of terrain variations.

V9 Flight Controller

The V9 Flight Controller is a high-performance controller designed for advanced flight stability and precision. It ensures smooth, controlled flights for agriculture drones, making it perfect for tasks that require precise maneuvering, such as field mapping or close-range crop inspection. The V9 offers intuitive controls and advanced flight algorithms, allowing drones to perform complex operations with ease.

K++V2 Flight Controller

The K++V2 Flight Controller is another powerful flight control system designed for high-precision agricultural tasks. It provides excellent stability and flight accuracy, even in challenging weather conditions. The K++V2 also supports advanced features like auto return-to-home and failsafe mechanisms, making it a reliable choice for extended agricultural missions where flight precision is critical.

Skydriod T12

The Skydriod T12 is a versatile and reliable remote control system designed to offer real-time control over drones. With long-range communication and high-frequency stability, it ensures uninterrupted control during critical farming tasks. Whether you’re managing multiple drones or operating a single unit over large fields, the Skydriod T12 provides the reliability and precision needed for effective drone operations.

MK15 Agriculture

The MK15 Agriculture is a professional-grade control system tailored for agriculture drones. It offers superior control over long distances and integrates advanced features such as real-time video streaming and telemetry data, providing pilots with comprehensive information during flights. This system is perfect for large-scale agricultural operations where precision and control are paramount.

MK32

The MK32 is an advanced flight control system designed for professional drone operators. Equipped with long-range communication, high-performance processing power, and an intuitive interface, the MK32 makes it easier to control agricultural drones during complex operations like large-scale crop spraying or field surveying. Its reliable performance and precision make it a top choice for professional farming applications.

Why Choose Bharat Skytech for Drone Electricals?

At Bharat Skytech, we understand that the efficiency and success of agriculture drone operations rely heavily on the quality of the electrical components used. That’s why we provide only the best-in-class drone electrical systems that are designed specifically for agricultural tasks. Our range of products—like flight controllers, radars, and communication systems—ensures that your drone is equipped to handle any task, from crop spraying to field mapping.With free shipping across India, a 1-year warranty, and replacement guarantee on all our drone electrical components, we ensure that you have access to the best products without hassle.

Drone payloads enable farmers to perform complex tasks with minimal effort and maximum efficiency. For example, FPV cameras give farmers real-time situation information, and AI tracking modules can detect people, vehicles, or crop problems. These payloads help collect useful information, monitor field conditions, and automate tasks that were previously done manually and took a long time. In large-scale farming, when timing and accuracy are critical, the appropriate payload can make a huge difference in yields and reduce business costs.

Modern agri drone payload systems do more than just take images. They now have waterproof cameras built for tough farming conditions, AI-powered modules that make their own decisions, and high-definition zoom cameras that let you get a closer look at things from the sky. All of these work together with drones to help farmers use smarter, faster, and more environmentally friendly methods.

As the demand for agricultural drones with higher payloads grows, more farmers and agri-tech businesses are adding multi-functional payloads to their drones, which are meant for specific tasks. The payload of a drone affects how well it can do its job in the field, whether that job is scouting, spraying, mapping, or tracking.

Improving payload technology is no longer a luxury; it is a necessity for future-looking agriculture.

What Are Agriculture Drone Payloads?

Drone payloads are special devices or parts that a drone uses to perform functions other than just flying. The drone itself lets you get around in the air and look at things, but the high payload agricultural drone is what makes it useful, whether that means acquiring data, using inputs, or engaging with the environment.

In agriculture, drone payloads are built for a variety of precision agriculture tasks. They transform drones from simple flying vehicles into smart, multipurpose gadgets that help farmers get more done, make better use of their resources, and cut down on physical labor.

Here Are the Most Common Types of Agriculture Drone Payloads (Products We Offer)

The right payload turns an agricultural drone into a smart, useful agricultural tool in precision farming. At Bharat Skytech, we have a carefully selected collection of advanced drone payloads that are designed just for farming. These are high-resolution FPV cameras, robust AI tracking modules, and small gimbal cameras, all built to work well on Indian farms.

Here’s a breakdown of the most impactful agriculture drone payloads we offer:

1. FPV Camera for Real-Time Navigation

SIYI AI Tracking Module 4T – Human and Vehicle Detection for Ag Drones

With the SIYI 4T AI module, your drone operations will become more automated and smarter. It has built-in computational power that enables it to locate and follow people, cars, and other moving targets on the field. This is particularly useful for automated monitoring, smart spraying when people are present, or tracking the movements of workers and machines on large farms.

• AI for tracking objects in real time

• Recognizing people and cars

• Helps with targeted operations and making sensible choices

2. High-Resolution Gimbal Camera with Zoom

SIYI A8 mini 4K 8MP Ultra HD 6X Digital Zoom Gimbal Camera

With the SIYI 4T AI module, your drone operations will become more automated and smarter. It has built-in computational power that enables it to locate and follow people, cars, and other moving targets on the field. This is particularly useful for automated monitoring, smart spraying when people are present, or tracking the movements of workers and machines on large farms.

• AI for tracking objects in real time

• Recognizing people and cars

• Helps with targeted operations and making sensible choices

3. FPV Camera for Real-Time Navigation

SIYI MK15 IP67 FPV Camera “A” – Waterproof for Agriculture Drones

The SIYI MK15 is a rugged FPV (first-person view) camera that can handle even the harshest conditions seen in the fields. It has an IP67 rating, which means it is completely protected against dust and water. This makes it perfect for use with spraying drones and in bad weather. This allows pilots to see the spraying in real time, fly closer to crops, and get better alignment for accurate spraying.

• IP67: Water- and dustproof

• Sharp FPV feed for pilot control

• Great for spraying missions and getting about nearby.

4. Wide-Angle Gimbal Camera for Navigation & Monitoring

SIYI A2 mini Ultra-Wide Angle FPV Gimbal Single Axis Camera

The SIYI A2 mini is the best payload to get a better view of the area. Its ultra-wide-angle lens captures a wide range of scenes, and its single-axis gimbal keeps the FPV feed stable so you can find your way around with ease.It’s small and light, making it a great main or secondary camera for agriculture drones that are used for observation and monitoring.

• Ultra-wide lens offers a wide perspective of the field

• Single-axis gimbal for FPV and stability

• Lightweight and great for navigation or visual inspection

Whether you need basic long-range control or advanced FPV (First Person View) capabilities, our selection is built for precision, ease of use, and strong signal reliability in field conditions.

Explore Top Models in This Collection

• Skydroid T12 – Compact and budget-friendly, ideal for basic long-range control without camera.

• Skydroid H12 – Designed for agriculture drones with an upgraded interface and robust range.

• Siyi UniRC 7 & 7 Pro – New era handheld ground stations built for industrial-grade drone operations.

• Siyi MK15 Mini & MK32 – Smart transmitters with HD video transmission and full FPV functionality, perfect for high-end agri-drone tasks.

• Combo Kits – Including transmitter, receiver, and camera — ready to plug and fly.

Why Choose Drone Remote Controllers from Bharat Skytech?

For agriculture drones, accuracy and signal strength aren’t optional — they’re essential. Our controllers and transmitters are designed to deliver seamless communication between pilot and UAV, whether you’re spraying crops, monitoring fields, or mapping large areas. Each unit is built for long-range use, real-time feedback, and ergonomic handling. With trusted brands like Skydroid and Siyi, you’re investing in high-performance tools used by drone professionals across India.

At Bharat Skytech, we not only offer the best prices (exclusive of GST), but also provide fast shipping, genuine product guarantees, and expert after-sales support.

Built for Farmers, Surveyors, and Drone Experts Alike

Whether you’re a precision agriculture service provider, drone technician, or fleet manager, our transmitters give you full control and confidence in the field. Shop now at Bharat Skytech and take your agri-drone performance to the next level with dependable remote control systems.

At Bharat Skytech, we offer high-capacity LiPo drone batteries and smart chargers specifically designed for agricultural applications. This page explains in detail what makes a drone battery work best, what are the best types of drone chargers, how to use them, and why Bharat Skytech is the best place to buy them in India.

What Is a Drone Battery?

An agricultural drone battery is a rechargeable energy source that provides the electricity needed for a drone to function. It powers all the vital parts, such as the motors that lift the drone, the propellers that keep it balanced and moving, and the onboard electronics such as GPS, sensors, flight controllers, and spray systems. When it comes to agricultural drones, batteries need to do more than just fly. It needs to carry the additional weight of heavy cargo like fertilizer or pesticide tanks and allow the drone to fly for longer periods of time so it can cover a larger area in a single trip.

These drone spraying battery also need to work well under tough conditions, such as when they’re exposed to dust, humidity, and changing temperatures. Because of these things, most modern agricultural drones use LiPo (Lithium Polymer) batteries. Long-range agriculture drone battery are popular because they have high energy density, are lightweight, and have a stable voltage output. heavy-duty drone battery are available in drone battery 6s 16000mAh configurations and have capacities ranging between 16000mAh to 22000 mah battery. These are great for long-range agricultural drone battery applications that require both power and durability.

Key Features of Agriculture Drone Batteries

Drones used in agriculture operate in harsh environments and require power systems that can support long, high-performance flights. Heavy-duty drone batteries made for agricultural purposes include the following important features:

1. High Capacity

Agricultural drones often have to fly over several acres of land in a single mission and carry large quantities of liquids for spraying or planting. These drones require very high power batteries to perform these types of tasks, usually ranging between 16000mAh to 22000mAh.

If a drone has a larger battery, it can stay in the air for longer, meaning it won’t need to land or replace batteries as often. This long flight time is necessary to cover great distances, especially over large fields or rural agricultural areas.

2. High Discharge Rate (C-Rating)

The C rating indicates how quickly a battery can safely use its power. Drones in agriculture must handle a lot of load, including carrying tanks of liquids, flying against the wind, and flying over rough terrain. Batteries that discharge at a rate of 20 °C to 25 °C provide power to the motors in the short term when required, allowing for smooth flight, stable hovering, and effective spraying.

The high C-rating helps keep performance stable throughout the flight, especially during difficult maneuvers or quick changes in altitude.

3. Stable Voltage Output

The drone needs to fly steadily the entire time for accurate spraying and navigation. This means you need a battery that can maintain a stable voltage from takeoff to landing, regardless of the load on it. Stable voltage protects GPS and flight control systems from sudden shutdowns or drops, helping to reduce accidents and uneven spray patterns. Even when the weather changes, a good ag drone battery should be able to transfer power evenly.

4. Smart Battery Monitoring (BMS Technology)

Many current drone batteries, especially for smart agriculture, come with advanced battery management systems (BMS). These systems monitor and display real-time information on the following:

• Voltage of each cell

• Temperature of the battery

• The overall health and status of the battery

• Charging and discharging cycles

Smart BMS helps people make smart choices, avoid overcharging or overusing the battery, and get maximum life out of it. It also makes things safer by letting users know when there is a possibility of overheating, voltage imbalance, or a short circuit. This is very important when flying expensive agricultural drones over active fields.

5. Rugged Durability

Drones used in agriculture have to operate in locations where dust, humidity, high temperatures, and even light rain are common. Batteries designed for these drones feature robust casings, water-resistant parts, and shock-absorbing layers to protect the cells inside. This robust design means the battery can be used repeatedly in tough field conditions without losing performance or protection over time.

Engineered for performance and durability, the Amass XT120(2+4)-M Gold Plated Connector (Yellow) offers an efficient and secure solution for high-current applications. Whether you’re powering drones, RC vehicles, or other electronic systems, this connector’s 2+4 configuration—two main power terminals plus four auxiliary pins—ensures you get power and signal through a single compact interface. The gold-plated copper contacts provide excellent conductivity and reduce resistance, ensuring minimal power loss even under load.

Key Features:

• Gold-Plated Contacts – Corrosion-resistant and conductive, designed for long-lasting, reliable connections

• 2+4 Pin Configuration – Two power + four signal terminals in one space-saving design

• Durable Build – Tough plastic housing with secure mating and high-heat resistance

• Easy Handling – Intuitive design makes it simple to plug/unplug, even in tight spaces

• Color-Coded – Bright yellow for easy identification and polarity checks

Technical Specifications:

• Model: XT120(2+4)-M.G.Y+

• Connector Type: Male

• Current Rating: Up to 120A (continuous)

• Voltage Rating: Up to 14V DC

• Contact Material: Gold-Plated Copper

• Configuration: 2 Main + 4 Auxiliary Pins

• Color: Yellow

• Weight: 0.018 kg

• Dimensions: 8 × 5 × 2 cm

Package Includes:

• 1 x Amass XT120(2+4)-M Gold Plated Yellow Connector (XT120(2+4)-M.G.Y+)

Applications:

• Agricultural drones needing reliable motor and signal connections

• RC vehicles, electric planes, and high-power battery systems

• Custom electronics where compact, multi-terminal connections are required

• Industrial robotics where current and telemetry must flow through a single interface

Why Choose This Product?

At Bharat Skytech, India’s trusted agriculture drone component store, we source only genuine Amass connectors to ensure that your UAVs and RC electronics operate at peak performance. Our connectors are used by drone professionals and commercial operators across India who depend on durability, reliability, and proper current handling for mission-critical operations.

Buy confidently, knowing you’re getting authentic, high-quality products backed by a team that understands what modern drone systems require.

Warranty:

• 15-Day Warranty – Covers only manufacturing defects. Replacement provided upon verification.

Warranty void if:

• Product is misused, soldered, or altered

• Subjected to static discharge, fire/water damage, or chemical exposure

• Damaged due to installation errors or modification attempts

With gold-plated terminals and robust 2+2 configuration, it ensures long-lasting reliability.

The Amass XT90PB(2+2)-M GOLD PLATED YELLOW (Model: XT90(2+2)PB-M.G.Y) connector is engineered for secure, high-current applications. Its dual-port design accommodates both power and signal lines in one compact unit, simplifying setups while enhancing connection safety. Featuring gold-plated contacts, this connector delivers low-resistance performance and corrosion resistance—critical for consistent power flow in mission-critical operations.

Its bright yellow casing aids in quick identification and organization within complex wiring systems. Whether you’re working on agricultural drones, robotic systems, or RC vehicles, this connector meets the demands of rugged field conditions while offering smooth plug-and-play functionality.

Key Features:

• Gold-plated terminals for superior conductivity and corrosion resistance

• 2+2 configuration supports both power (45A) and signal (1A) connections

• Max Voltage: 500V DC

• Durable housing with flame-retardant UL94-V0 rating

• Wide operating temperature: -20°C to 120°C

• Compact, visible yellow design for easy identification

• Mechanical Life: 100 mating cycles

• Protection Level: IP40

Technical Specifications:

• Model Series: XT90

• Connector Type: XT90PB (2+2) Male

• Gender: Male

• Rated Current: 45A MAX (Power), 1A (Signal)

• Maximum Voltage: 500V DC

• Temperature Range: -20℃ to 120℃

• Mechanical Life: 100 cycles

• Flammability Rating: UL94-V0

• Protection Level: IP40

• Shipping Weight: 0.009 kg

• Shipping Dimensions: 8 × 5 × 1 cm

Package Includes:

• 1 x Amass XT90PB(2+2)-M GOLD PLATED YELLOW Connector – XT90(2+2)PB-M.G.Y

Applications:

• Agricultural and industrial drones

• RC cars, boats, and aircraft

• Electric bikes and scooters

• Custom battery packs

• Power distribution systems with telemetry or monitoring lines

Why Choose This Product?

Unlike traditional connectors, the XT90PB(2+2) integrates both power and signal pathways into one connector, streamlining builds and reducing wiring clutter. Gold plating provides extended lifespan and performance under high-load conditions. For projects demanding durability, safety, and high current flow, this Amass connector is the preferred choice.

Warranty:

• Duration: 15 Days from the date of delivery

• Coverage: Manufacturing defects only

Warranty void if:

• Product is physically damaged or mishandled

• Exposed to static discharge, liquids, fire, or chemicals

• Tampered, soldered, or modified in any way

What is a Hobbywing Agriculture Drone Motor and Why Is It Essential?

The Hobbywing Agriculture Drone Motor is a brushless rotor motor with a lot of power, used to power agriculture drones that perform tasks like spraying pesticides, fertilizing crops with liquid, mapping crops, and keeping an eye on things. These agriculture brushless motors are built to last and carry heavy loads, so they work well even in very rough field conditions. These motors can handle heat, dust, and changes in load without losing balance or vibrating. Heavy-lift agricultural drone motors, such as the hobbywing x11 motor with 4314 Propeller, are particularly good at providing reliable thrust for drones carrying loads of 20 liters or more.

How Are Hobbywing Motors Used in Agriculture?

The Hobbywing motor powers the propulsion system of agricultural UAVs, enabling them to fly at stable altitudes with large tanks of liquid cargo. The motor keeps the drone in the air and enables it to move around large fields, whether it’s spraying pesticides, spreading seeds, or taking pictures of fields.

For example, the Hobbywing X9 Plus X Rotor Motor with CCW Propeller Combo is a heavy-lift ag drone motor for farming that can handle medium-heavy weight drones. It has excellent heat dissipation and stable torque for precise flight. When used with the right ESC and propellers, these motors help agricultural drones fly smoothly over large, uneven fields.

Some drones use combos such as the Hobbywing X8 100kV D40 motor with 3011CW propeller combo for 10-12 liter drones, or the Hobbywing X6 plus 150kV D30 motor with 2480CW or CCW propeller which are great for small agricultural UAVs that work in small farms or gardens.

Hobbywing Motors – Performance for Precision Agriculture

At Bharat Skytech, we have Hobbywing Farm Drone Motors that work with small, medium, and heavy-duty UAVs. The Hobbywing X11 Plus CW Motor Combo with 4314 Propeller is one of the best-selling items. It was made just for the 20L+ AG drone. This motor has a lot of torque, doesn’t vibrate much, and is perfect for long-lasting spraying jobs. The X11 Plus CCW combo, which is similar to this one, ensures that the quadcopter and hexacopter can rotate completely and work in harmony with each other.

The Hobbywing X9 Plus X Rotor Motor with CCW Propeller Combo and the X9 Plus with CW Combo are also great choices for medium-range payloads. These motors can lift drones with a payload of 12 liters to 16 liters. These motors can do this while keeping their temperature low even under heavy load.

We also have the Hobbywing XRotor X8 Motor Only – CW & CCW and the Hobbywing XRotor X6 Plus Motor Only – CW, which are great for drones with 4L to 10L water tanks. These models are suitable for farmers who use drones to spray, spread nutrients, or map small fields.

Each engine is fine-tuned to work with agricultural drone propellers and ESC systems, so that everything runs smoothly. The ag drone motor only in the high thrust motor for drone line has the best compatibility and efficiency for agricultural setups.

Hobbywing Pumps – Precision Liquid Delivery

In any agricultural drone, a reliable spray pump is just as important as the motor. We at Bharat Skytech sell Hobbywing Brushless Water Pumps. These include Brushless Water Pump Combo – 8L | 10A | 14S V1 HW and Small Water Pump 5L Brushless. These pumps work well for spraying at all times, even at high pressures. They are also designed to keep liquids flowing, which is essential for spraying pesticides, herbicides, and fertilizers.

These pumps are built for long spraying sessions and work perfectly with all popular drone motor for pesticide setups, especially when used with the X9 and X11 propulsion systems. If you are using a heavy-duty agricultural drone motor, using the Hobbywing brushless pump with it will ensure that there are no blockages or backflows while it is running, allowing you to cover more distance per charge.

We pride ourselves on providing exceptional service, quality products, and hassle-free shopping. Here’s why we’re the preferred choice:

Key Benefits of Choosing Bharat Skytech:

Free Shipping Across India: No matter where you are located, Bharatskytech deliver your products quickly and efficiently at no additional cost.

1-Year Warranty & Replacement Guarantee: Every purchase is backed by our commitment to quality, ensuring you can buy with complete confidence.

Secure Checkout: Your personal information is protected through our encrypted payment gateway, allowing you to shop with peace of mind.

24/7 Customer Support: Our dedicated team is always available to assist you, providing round-the-clock support whenever you need it.

Wide Range of Products: From motors to payloads, explore a variety of drone components specifically curated for the Indian agriculture market.

Choose Bharat Skytech for reliable, top-quality drone components and exceptional service tailored to the needs of the Indian market.

Our collection features original Amass connectors trusted globally for their performance, durability, and safety in drone, RC, and industrial electronic applications.

Reliable Connectors for Agri Drones, UAVs, and Robotics

At Bharat Skytech, we understand the importance of stable and secure power connections in high-performance applications. That’s why we bring you Amass connectors known for their tight locking design, low contact resistance, and flame-retardant housings – ideal for agriculture drones, UAV spraying systems, battery-powered robots, and more.

Complete Range – MR, XT, AS Series & More

Choose from a wide range of original Amass connectors:

• MR Series (e.g., MR30PW) – Compact, reliable connectors for low-to-mid power applications.

• XT Series (XT30, XT60, XT90) – Popular for drone batteries, ESCs, and power distribution.

• AS Series (AS150) – Designed for high-current loads with anti-spark technology.

Each product listing includes full specifications like rated current, voltage, weld leg height, temperature tolerance, and IP protection rating.

Original Amass Products – No Compromises

We only list genuine Amass connectors, ensuring your components are durable, fire-retardant (UL94-V0), and safe for professional use. These connectors are ideal for drone OEMs, agri-tech startups, repair professionals, and electronics hobbyists alike.

Rated for 45A and supporting dual signal pins, it ensures stable performance even in demanding conditions.

The Amass XT90(2+2) Female Connector (XT90(2+2)-F.G.Y) is built for high-reliability electrical connections in advanced power setups. This connector is widely used in drones, electric vehicles, and other RC systems where both power and signal need to be safely transmitted. It supports a current of up to 45A and includes two signal pins for enhanced data or telemetry integration. With robust build quality, a flame-retardant shell, and IP40 protection, it ensures long-term performance and secure connections in harsh environments.

Key Features:

• Supports 45A continuous current (10AWG)

• Dual signal pins for power and communication

• High voltage handling up to 500V DC

• Easy plug-and-play design

• Gold-plated terminals for reduced resistance

• Flame-retardant housing (UL94-V0 rated)

• Withstands up to 100 mating cycles

• Operating temperature: -20°C to 120°C

• IP40 protection for dust and debris resistance

Technical Specifications:

• Model Series: XT90

• Connector Type: XT90(2+2)

• Gender: Female

• Rated Current: 45A MAX (Power), 1A (Signal)

• Max Voltage: 500V DC

• Wire Gauge Support: 10AWG

• Temperature Range: -20°C to 120°C

• Mechanical Life: 100 mating cycles

• Protection Level: IP40

• Flammability Rating: UL94-V0

• Shipping Weight: 0.011 kg

• Shipping Dimensions: 12 × 8 × 1 cm

Package Includes:

• 1 x Amass XT90(2+2) Female Connector – XT90(2+2)-F.G.Y

Applications:

• Agricultural and industrial drones

• RC planes, cars, and helicopters

• Electric bikes and scooters

• Battery-powered robotics

• High-power DIY electronics projects

Why Choose This Product?

The Amass XT90(2+2) Female Connector is not just a basic battery connector—it’s a dual-purpose solution for modern applications. Its two signal pins enable integrated power and signal communication, making it ideal for complex drone setups and data-intensive systems. With reliable construction, safety-rated materials, and easy usability, it’s trusted by industry professionals and hobbyists alike.

Warranty:

• Duration: 15 Days from the date of delivery

• Coverage: Manufacturing defects only

Warranty void if:

• Product is physically damaged or mishandled

• Exposed to static discharge, liquids, fire, or chemicals

• Tampered, soldered, or modified in any way

It combines power and signal connections in a single compact unit.

The Amass XT90PW(2+2) Male Connector is a high-quality, gold-plated connector designed for high-current and high-voltage applications in drones, RC vehicles, and electric systems. It combines power and signal connections in a single compact unit.

Key Features:

• Robust Design: Built to handle tough conditions and maintain consistent performance.

• Dual Configuration (2+2): Combines power and signal pins for efficient, compact connections.

• Reliable Current Handling: Supports up to 45A current for power and 1A for signal pins.

• Gold-Plated Contacts: Offers excellent conductivity and minimizes oxidation over time.

• Flame Retardant: UL94-V0 rated housing for added safety.

• High-Temperature Tolerance: Operates reliably in a wide temperature range from -20℃ to 120℃.

• Enhanced Mechanical Life: Rated for 100 mating cycles x2.

Technical Specifications:

• Model Series: XT90

• Item Type: Battery Connector

• Gender: Male

• Rated Current: 45A MAX (△<85℃), Signal Pin: 1A

• Max Voltage: 500V DC

• Mechanical Life: 100×2

• Protection Level: IP40

• Flame Retardant Rating: UL94-V0

• Weld Leg Height: 3.3mm

• Shipping Weight: 0.002 kg

• Shipping Dimensions: 12 × 9 × 2 cm

Package Includes:

• 1 x Amass XT90PW(2+2) Male Connector – XT90(2+2)PW-M.G.Y

Applications:

• Agricultural and industrial drones

• RC cars, boats, and aircraft

• Electric bikes and scooters

• Custom battery packs

• Power distribution systems with telemetry or monitoring lines

Why Choose This Product?

Built for performance and durability, this connector features a flame-retardant shell, robust 2+2 pin design, and gold-plated contacts to ensure reliable conductivity even under extreme conditions. Its mechanical life of up to 200 connections and a rated current of 45A make it ideal for demanding electronic setups. Whether for drones or industrial electronics, this connector provides a dependable solution with secure fitting and efficient current handling.

Warranty:

• Duration: 15 Days from the date of delivery

• Coverage: Manufacturing defects only

Warranty void if:

• Product is physically damaged or mishandled

• Exposed to static discharge, liquids, fire, or chemicals

• Tampered, soldered, or modified in any way

Made from flame-retardant materials and featuring a compact design, this connector delivers safety and performance in demanding environments.

The Amass XT120(2+2) Female Connector is crafted for secure and high-efficiency power delivery. Its 2+2 pin design provides a balance of power and signal connections, allowing for stable and uninterrupted electrical contact in demanding environments. With an IP40 protection level, UL94-V0 flame-retardant housing, and wide operating temperature range, it is built to handle tough conditions while maintaining safety and durability. Whether you’re working on RC models, agricultural drones, or industrial electronics, this connector offers a dependable interface solution.

Key Features:

• Rated up to 60A Max for high-current applications

• Flame-retardant UL94-V0 housing for safety

• Secure fit ensures strong mechanical contact

• 2+2 pin configuration supports both power and signal

• Durable build with a mechanical lifespan of 100 mating cycles

• Wide temperature tolerance from -20°C to 120°C

• Reliable for RC, drone, EV, and robotics use

Technical Specifications:

• Item Type: Battery Connector

• Model: XT120(2+2)-F.S.Y +

• Connector Type: Female

• Rated Current: 60A

• Voltage Rating: 500V DC

• Protection Level: IP40

• Flame Retardant Rating: UL94-V0

• Operating Temp: -20℃ to 120℃

• Weight: 0.01 kg

• Dimensions: 12 × 5 × 2 cm

Package Includes:

• 1 x Amass XT120(2+2) Female Connector – XT120(2+2)-F.S.Y +

Applications:

• Agricultural and industrial drones

• RC cars, boats, and aircraft

• Electric bikes and scooters

• Custom battery packs

• Power distribution systems with telemetry or monitoring lines

Why Choose This Product?

The Amass XT120(2+2) Female Connector stands out for its high reliability, safety, and performance in high-power applications. Manufactured by Amass, a trusted name in the industry, this connector is built to handle up to 60A of current and 500V DC, making it ideal for agriculture drones, RC vehicles, and custom battery setups. Its flame-retardant UL94-V0 rated material and IP40 protection level ensure safety even in demanding conditions. With a compact design, long mechanical life, and ease of use, this connector is the preferred choice for professionals and enthusiasts who require secure and efficient power delivery.

Warranty:

• Duration: 15 Days from the date of delivery

• Coverage: Manufacturing defects only

Warranty void if:

• Product is physically damaged or mishandled

• Exposed to static discharge, liquids, fire, or chemicals

• Tampered, soldered, or modified in any way

This powerful bundle, which includes the T12 12-channel transmitter, R12 receiver, and high-quality onboard camera, is the top choice for professionals looking for range, reliability, and advanced features. Skydroid T12 Agricultural Transmitter RC with R12 Receiver and Camera (Combo) is specifically designed for UAVs used in agriculture, surveillance, mapping and various industrial applications.

This powerful Skydroid T12 with camera and R12 receiver provides secure data transmission, user-friendly operation and extended range for your UAV missions.

Why Choose the Skydroid T12 with R12 Receiver and Camera?

The Skydroid T12 with R12 Receiver is designed for serious drone pilots who want the most out of their control systems. Whether you’re spraying pesticides, surveying agriculture, or monitoring large plots of land, this system provides real-time video feedback, fast signal handling, and multi-device support for a variety of RC platforms.

Key highlights:

• Long-range FHSS-based communication

• Integrated 3-in-1 camera for real-time visual feedback

• 30km data link and up to 20km video transmission under SD quality

• Dual antenna design with high-gain coverage

• APP-based parameter tuning and firmware upgrade

Skydroid T12 Combo Overview: Features and Specifications

1. Advanced Communication Technology.

The Skydroid T12 combo is built on the basis of FHSS (Frequency Hopping Spread Spectrum) modulation.It delivers a consistent, interference-free signal across 12 channels, making continuous connectivity possible for even the most demanding applications.

2. Long-Range Data and Video Transmission

The Skydroid T12 with camera excels at distance handling. With:

• Video transmission range: up to 20 kilometers (SD quality).

• Data link range: up to 30 kilometers.

This combination is appropriate for long-term agricultural tasks including crop dusting and field surveillance.

3. Integrated Camera Support

he bundled 3-in-1 camera provides real-time video feedback, ideal for missions requiring visual data. Whether for scouting, mapping, or spraying verification, this Skydroid T12 camera with R12 receiver and camera pair provides situational awareness from a distance.

4. App-Based Configuration

Users can configure parameters, calibrate controls, and upgrade firmware directly from the Skydroid app. The old OSD has been replaced with a modern, touch-based interface, allowing for faster modifications and more efficient mission planning.

Package Inclusions – Skydroid T12 Agriculture Combo

When you order the Skydroid T12 Agriculture Transmitter RC with R12 Receiver & Camera (Combo), you will receive the following:

• 1 x Skydroid T12 2.4GHz 12CH Transmitter

• 1 x R12 Receiver with Antenna

• 1 x 3-in-1 Digital Camera

• 1 x Connecting Cable Set

• 1 x Carrying Case

It is a fully equipped, ready-to-install combo package, specifically designed for agricultural drone manufacturers, enthusiasts, and UAV system integrators.

Equipped with a high-definition 7-inch 1920×1200 resolution touchscreen with 1600-nit brightness, advanced dual antennas, a unique sub joystick, and six flight mode buttons, the UniRC 7 Pro sets a new standard for UAV operation, delivering unmatched precision and control.

Key Features

1. Advanced Communication Technology

• Reliable Range:The UniRC 7 Pro Operates up to 40 KM in optimal conditions.

• Dual Frequency Transmission: Supports both 2.4 GHz and 5 GHz for enhanced anti-interference capabilities.

• Real-Time Data: Offers single-stream 4K@30fps or dual-stream 1080p@60fps transmission.

• Secure Data: AES encryption ensures robust data security.

2. Enhanced User Interface

• High-Brightness Touchscreen: 7-inch 1920×1200 resolution with 1600-nit brightness for superior visibility in all lighting conditions.

• Comprehensive Controls: 10 customizable buttons, six flight mode buttons, a sub joystick, and two three-stage switches for precise handling.

3. Durability and Extended Battery Life

• Rugged Design: IP54-rated for dust and water resistance, ensuring dependable performance in challenging environments.

• Long Battery Life: Operates for up to 8 hours with quick charging via the PD 30W protocol.

4. Lightweight and Ergonomic

• Compact Design: Weighs just 1.46 kg for comfortable use during long missions.

• Quick-Release Belly Brackets: Streamlined for efficient handling and storage.

Specifications

Ground Unit

• Screen: 7-inch 1920×1200 resolution touchscreen, 1600-nit brightness.

• Transmission Frequencies: 2.4–2.476 GHz and 5.725–5.829 GHz.

• Battery Capacity: 13,400 mAh with up to 8 hours of usage.

• Hardware: 4GB RAM + 64GB ROM, powered by Android 13.

• Connectivity: USB-A, HDMI, LAN ports, Wi-Fi 5, Bluetooth 5.0, and GNSS support (GPS/GLONASS/BeiDou/Galileo/QZSS).

Air Unit

• RC Signal Output: 16-channel S.Bus, 5-channel PWM.

• Working Voltage: 7–76 V.

• Weight: Approx. 115 g (without antennas).

Why Choose UniRC 7 Pro New Era Handheld Ground Station

The UniRC 7 Pro offers unparalleled performance with dual-frequency communication, a 40 KM range, and a 7-inch 1920×1200 resolution touchscreen with 1600-nit brightness for clear visibility in any environment. Its robust design, AES-encrypted data transmission, and intuitive controls make it a reliable and efficient choice for UAV operations, ensuring precision and durability across various applications.

The motor is optimized for use with 12S LiPo batteries and features an ingress protection rating of IPX6, providing excellent durability in harsh environmental conditions. With a robust NSK ball bearing (waterproof) and a foldable 30×11″ propeller, the X8 delivers reliable, efficient performance for demanding agricultural spraying tasks.

Main Features:

• High Thrust Output: The Hobbywing X8 100KV D40 motor Capable of producing up to 15kg of thrust per axis at 46V, ideal for agricultural drone applications.

• Wide Operating Range: Works efficiently in temperatures ranging from -20℃ to 50℃.

• Robust Construction: Includes waterproof NSK ball bearings and an IPX6-rated motor for added durability in wet conditions.

• Efficient Design: Foldable 30×11” propeller ensures aerodynamic efficiency and easy transport.

• Precision Control: Supports PWM input signals from 50-500Hz for precise throttle control.

Specifications:

• Max Thrust: 15kg/axis (46V, Sea Level)Recommended

• Battery: 12S LiPo

• Combo Weight: 1150g (including propeller)

• Ingress Protection: IPX6

• Motor: 100KV with an 81x20mm stator

• ESC: Supports 12S LiPo, max input voltage of 52.2V, and a peak current of 80A

• Propeller: 30×11″ foldable propeller for high efficiency

Performance Data:

At 46V (12S LiPo), the system delivers a thrust range of 2.5kg to 14.7kg, with power consumption and efficiency varying based on throttle input, providing optimal performance for agricultural applications.

Its modular design allows for quick assembly and disassembly, while advanced cooling and sealing technologies enable longer flight times and easy cleaning. The system includes an A8 brushless motor, a 14S FOC 100A ESC, and a 31-inch folding propeller, making it the ideal choice for drones with a take-off weight ranging from 22 to 42 kg.

Main Features

• Safe & Reliable: The T Motor A8 Equipped with strength and fatigue simulations on key parts, ensuring a reliable and durable system.

• Quick Assembly & Disassembly: Modular design allows for a simple 5-step installation onto the UAV arm without complex assembly.

• Efficient Cooling: Features cyclic cooling technology and magnetocaloric coupling simulations for optimal heat dissipation, resulting in improved flight time and system efficiency.

• Easy Cleaning: Sealing design and potting process enable the propulsion system to be rinsed directly with water for quick cleaning.

• Extended Service Life: The hot-charging process improves assembly accuracy, and the system undergoes aging tests for up to 2000 hours.

• Multiple Functions: Built-in monitoring, fully parameterized settings, and cloud box analysis. It offers PWM/CAN dual backup, kinetic energy recovery, adjustable navigation lights, and intelligent protections.

Specifications

• Motor: A8 KV115 brushless motor

• ESC: 14S FOC 100A

• Propeller: MF31P (31 inches folding propeller)

• Rated Thrust: 5-7kg

• Max Thrust: 19kg

• Efficiency at Rated Thrust: 8.5g/W (7kg)

• Recommended Battery: 12-14S LiPo

• Take-off Weight:

  • Quadcopter: 22-30kg

  • Hexacopter: 30-42kg

• Tube Size: 40mm

• Working Temperature: -30°C to 50°C

• Weight: 1250g ± 2% (including wires and propeller)

• IP Rating: IPX6

• Stator Size: 81x20mm

• Throttle Range: 1100-1940us (fixed)

• Control Method: PWM/CAN

• Max Voltage: 61V

• Peak Current: 100A (short time)

• Wire Length: 1100 ± 5mm

Built to withstand environmental impacts, these propellers are a trusted choice for enthusiasts seeking efficiency and durability.

The Hobbywing X8 3011 Propellers with Hub – CCW are meticulously crafted to offer top-notch performance, reliability, and durability for drone enthusiasts. Designed with advanced engineering, these propellers ensure seamless flight experiences, making them suitable for various applications such as recreational flying, aerial photography, and professional drone operations.

Key Features:

• Precision Engineering: These propellers are crafted with precision to deliver optimal performance and reliable operation.

• Smooth and Stable Flights: The advanced design ensures smooth and stable flights, offering precise control and enhanced maneuverability.

• Exceptional Durability: Built to endure aerial exploration, they exhibit resilience against impacts and environmental stressors.

• CCW Rotation Configuration: Featuring a counterclockwise rotation design, the propellers provide balanced torque distribution, improving propulsion efficiency and flight dynamics.

• Wide Compatibility: Compatible with various drone models and motor setups, these propellers cater to a range of needs, ensuring versatility for drone enthusiasts.

• Trusted by Drone Enthusiasts: A reliable choice for those seeking performance, durability, and consistency in aerial adventures.

Specifications:

• Color: Black

• Rotation Direction: CCW

• Number of Blades: 2

• Weight (per unit): 205 g

• Shipping Weight: 0.245 kg

• Shipping Dimensions: 44 × 19 × 5 cm

Package Includes:

• 1 x Hobbywing X8 3011 Propellers with Hub – CCW

Warranty Details

This product is covered by a 1-month warranty against manufacturing defects from the time of delivery. The warranty ensures protection against any defects caused during the manufacturing process.

Warranty Coverage Includes:

• Replacement for products with manufacturing defects.

Warranty Voids If:

• The product is misused, tampered with, or damaged due to static discharge, accidents, water, fire, chemicals, or alterations such as soldering.

Why Choose Hobbywing X8 3011 Propellers with Hub – CCW?

The Hobbywing X8 3011 Propellers with Hub – CCW are the perfect balance of durability, performance, and precision. Whether you are exploring new heights or capturing stunning aerial visuals, these propellers deliver unparalleled reliability and efficiency for all your drone needs.

This motor system is built to handle heavy loads, offering a seamless flying experience even in the toughest conditions. Equipped with a waterproof IPX6 rating, the X9 Plus guarantees durability, while its rapid cooling and collision-proof design ensure reliable operation in all environments.

Designed for 14S LiPo batteries, the XRotor X9 Plus Motor is ideal for agriculture drones requiring high power and efficiency. The system is perfect for handling heavy payloads and maximizing operational range, making it a top choice for professionals in agriculture and industrial applications.

Main Features:

• Maximum Thrust: 27kg per rotor (54V, Sea Level), delivering exceptional lifting power.

• High Load Capacity: Designed for 11-13kg per rotor single-axis load for optimal performance.

• Advanced Motor Design: The X9 Plus features Hobbywing’s large load 9 Series motor, optimized for electromagnetic strength and system efficiency.

• Integrated Structure: The motor and ESC are combined into one unit for easy installation, making it a lightweight, compact, and robust system.

• IPX6 Waterproofing: Fully sealed to protect against dust, water, and corrosion, perfect for harsh agricultural environments.

• Advanced Cooling System: The motor has a rapid cooling design to ensure high efficiency even under heavy loads.

• Collision-Proof Design: Reinforced with impact-absorbing features to protect the motor and ESC from damage during crashes or impact.

• Real-Time Monitoring: Equipped with multiple protection functions like current protection, stall protection, and voltage abnormality protection for safe, efficient flight.

• Navigation Lights: Integrated lights to indicate operational issues and allow easy troubleshooting.

• Support for System Upgrades: Easily update your ESC using Hobbywing DataLink software.

Specifications:

• Maximum Thrust: 27kg/rotor (54V, Sea Level)

• Recommended Takeoff Weight: 11-13kg/rotor (54V, Sea Level)

• Recommended Battery: 14S LiPo

• Operating Temperature: -20°C to 50°C

• Total Weight: 1774g

• Ingress Protection: IPX6 (Waterproof and Dustproof)

Motor:

• KV Rating: 100rpm/V

• Stator Size: 96 x 20mm

• Bearings: High-quality imported bearings from Japan

ESC:

• Battery Compatibility: 6-14S LiPo

• PWM Input Signal Level: 3.3V/5V (Compatible)

• Throttle Signal Frequency: 50-500Hz

• Operating Pulse Width: 1050-1950us (Fixed, cannot be programmed)

• Max Input Voltage: 61V

• Max Input Current (Short Duration): 120A (with good heat dissipation)

• BEC: None (Battery-to-ESC connection only)

Propeller:

Diameter x Pitch: 36×19 inch (Foldable)

Paired with a 12-14S LiPo battery, it operates efficiently under varying environmental conditions, making it a versatile choice for agriculture drone operations such as spraying and mapping. The motor is waterproof with an IPX6 rating and supports optimal performance in temperatures ranging from -20°C to 50°C, offering durability and reliability even in harsh conditions.

Main Features:

• High Thrust Performance:The X6 Plus provides up to 11.8kg of thrust per rotor, allowing it to handle heavy payloads for agriculture drones with ease.

• Waterproof and Durable:With an IPX6 waterproof rating and NSK ball bearings, this motor is built to perform in wet and dusty environments, ensuring long-term reliability.

• Wide Operating Range:The motor operates seamlessly within a wide temperature range (-20°C to 50°C), making it suitable for various agricultural applications across different regions.

• Energy Efficient:The motor achieves high efficiency, with thrust-to-power ratios that optimize energy usage, extending flight times for agricultural drones.

• Easy to Integrate:Designed for 30mm carbon fiber tube arms, it integrates easily into most drone frames, reducing setup time and complexity.

Specifications:

• Max Thrust: 11.8kg/Axis (46V, Sea Level)

• Thrust/rotor: 3.5-5.5kg/Axis (46V, Sea Level)

• Recommended Battery: 12-14S LiPo

• Operating Temperature: -20~50°C

• Total Weight: 790g

• Ingress Protection: IPX6 (Waterproof)

• KV Rating: 150rpm/V

• Stator Size: 62*18mm

• Powertrain Arm Tube

• Outer Diameter: 30mm

• Bearing: Waterproof NSK Ball Bearing

• ESC Compatibility: 12-14S LiPo, PWM Input Signal (3.3V/5V), Throttle Signal Frequency (50-500Hz)

• Max Input Voltage: 61V

• Max Input Current (Short Duration): 80A

• Propeller: 24*8.0 inch foldable propeller

Key Benefits:

• Precision Agriculture: Perfect for drones used in precision agriculture for spraying, mapping, and monitoring tasks.

• Lightweight & Efficient: The lightweight build and excellent energy efficiency make it ideal for drones requiring extended flight times and high mobility.

• Quick Setup: Easy to install with a modular design for 30mm drone arms, saving time on assembly.